0.875" × 10 TPI PUSH-BUTT (push type) Internal Thread Specifications

0.875-10 PUSH-BUTT-2B · 0.8750-10 PUSH-BUTT-2B

ASMESTD: ASME B1.9SOURCE: Table 3, Tables 1, 2, 5TYPE: Internal (nut/tapped hole)CLASS: 2BFLANKS 7° / 45°ROOT: roundTable 1 combination

Thread profile

0.875-10 PUSH-BUTT-2B: solid = maximum material, dotted = minimum material. Flanks 7° (pressure) and 45° (clearance) from the radial line, 52° thread angle; drawn to scale.

Limits of size, class 2B

Dimension	Basic	Max	Min	Tolerance
Major diameter DnRoot of the female thread, min = D + 0.12542p; max for reference	0.8750	0.9032ref.	0.8875
Pitch diameter EMin = D − h	0.8150	0.8224	0.8150	0.0074
Minor diameter KnCrest of the female thread, min = D − 2h	0.7550	0.7624	0.7550	0.0074
Root radius rRound root, female (Fig. 1a)		0.007141	0.003570

Dimensions in inches. Values are those of the standard (ASME B1.9); calculated cells follow the standard’s formulas. Where the standard prints a value that differs from its formula, the printed value is shown with a note.

Mating male thread, limits of size, class 2A

Dimension	Basic	Max	Min	Tolerance
Major diameter dCrest of the male thread, max = D − G	0.8750	0.8701	0.8627	0.0074
Pitch diameter EMax = D − h − G	0.8150	0.8101	0.8027	0.0074
Minor diameter KsRoot of the male thread; min is a reference value	0.7550	0.7376	0.7219ref.	0.0157ref.
Allowance GSpace below basic size; equals the Class 3 PD tolerance (Sec. 7)		0.0049
Root radius rRound root, male (Fig. 1a)		0.007141	0.003570
Thread engagement heh − G/2 at max, less the PD tolerance at min		0.057550	0.050150

Lead, flank angle and length of engagement

Lead + flank variation limit Σ: 0.00740 inPitch diameter equivalent of lead and flank errors together (Class 2: the PD tolerance; Class 3: half)
Lead variation alone ±δl: 0.00415 inAllowable lead error if there is no flank error
45° flank angle variation alone ±δα: 3.895 °Half-angle error of the clearance flank
7° flank angle variation alone ±δα: 8.222 °Half-angle error of the pressure flank

Gaging Sections 10, 11 · Tables 6, 7, 8, 11

Male thread 0.875-10 PUSH-BUTT-2A

Gage pitch tolerance (W): 0.00025 in
Gage 7° flank angle tolerance: 10 min
Gage 45° flank angle tolerance: 6 min
Gage major / minor tolerance: 0.0006 in
Gage pitch diameter tolerance: 0.00020 in
PD equivalent of pitch and flank tolerance: 0.0008 in
GO pitch diameter limit: 0.8101 in
NOT GO pitch diameter limit: 0.8027 in
NOT GO truncated crest diameter: 0.7677 in
Setting plug truncated major diameter: 0.8501 in
Best-size wire: 0.05415 · C = 0.08188 in, C
Maximum wire: 0.06143 · C = 0.10486 in, C

Female thread 0.875-10 PUSH-BUTT-2B

Gage pitch tolerance (X): 0.00030 in
Gage flank angle tolerance: 10 min
Gage major / minor tolerance: 0.0006 in
Gage pitch diameter tolerance: 0.00030 in
PD equivalent of pitch and flank tolerance: 0.0010 in
GO pitch diameter limit: 0.8150 in
NOT GO pitch diameter limit: 0.8224 in
NOT GO truncated crest diameter: 0.8574 in
Plain gage tolerance: 0.00010 in
Root relief width GO: 0.016700 in
Root relief width NOT GO: 0.025000 in

Notes

Class 2: no taper/roundness requirement (para. 6.6.1).

Mates

0.875-10 PUSH-BUTT-2B takes a thread of the same standard at the same size and pitch. The standard mating external thread is class 2A. Check the fit with the standard pair →

Working out the mating options…

Different pitch or a different thread family never mate; the fit check runs over both tolerance zones.

Related thread sizes

Same diameter other pitch, and neighbouring sizes

→ 0.875" × 12 TPI → 0.875" × 16 TPI → 0.75" × 20 TPI → 1" × 10 TPI → 0.875" × 10 TPI external

All values for 0.875-10 PUSH-BUTT-2Bevery column of the workbook row

All values of the workbook row 0.875-10 PUSH-BUTT-2B
Designation	0.875-10 PUSH-BUTT-2B
Decimal designation	0.8750-10 PUSH-BUTT-2B
Threads per inch	10
Thread form	PUSH-BUTT
Series (Table 1)	PUSH-BUTT
Series name	Push type, rounded root
External / internal	Internal
Class	2B
Nominal size (in.)	0.875
Pitch P (in.)	0.10000000
Basic major dia D (in.)	0.8750
Size category	Table 1 combination
Source table	Table 3, Tables 1, 2, 5
Printed page	4, 5, 6, 10
Major dia max (in.)	0.9032
Major dia min (in.)	0.8875
Major dia status	Min = D + 0.12542P (basic); max is reference only = max PD + 0.80803P (para. 6.3, Sec. 4); no tolerance specified
Allowance G (in.; internal: mating external value, reference)	0.0049
Tolerance range (Tables 3-5)	Over 0.7 thru 1.0
Range over (in.)	0.7
Range thru (in.)	1.0
Range mean dia for formula (in.)	0.850
Length of engagement Le = 10P (in.)	1.0000
Basic pitch dia E = D - h (in.)	0.8150
Pitch dia max (in.)	0.8224
Pitch dia min (in.)	0.8150
PD tolerance (in.)	0.0074
Basic minor dia K = D - 2h (in.)	0.7550
Minor dia max (in.)	0.7624
Minor dia min (in.)	0.7550
Minor dia tolerance (in.)	0.0074
Minor dia status	Toleranced: min = D - 2h (basic), max = min + PD tolerance (para. 6.2)
Root radius max (in.)	0.007141
Root radius min (in.)	0.003570
Root truncation s max (in.)	0.008260
Root truncation s min (in.)	0.004130
Engagement height he max (in.)	0.057550
Engagement height he min (in.)	0.050150
Lead + flank PD-equivalent limit (in.)	0.00740
Lead variation alone ± (in.)	0.00415
45° flank variation alone ± (deg)	3.895
7° flank variation alone ± (deg)	8.222
Lead angle at basic PD (deg)	2.2366
Lead angle (deg min)	2° 14′
Tensile stress area As (sq in.)	not given in the standard
Thread angle (deg)	52
Pressure (load) flank angle (deg)	7
Clearance flank angle (deg)	45
Flank orientation	Push type (external thread pushes): 7° load flank leads, 45° clearance flank follows (Sec. 9)
Sharp V height H (in.)	0.089064
Basic thread engagement height h (in.)	0.060000
Thread height hs = hn (in.)	0.066271
Crest truncation f (in.)	0.014532
Crest width F (in.)	0.016316
Sweep cut: start diameter (in.)	0.755000
Sweep cut: tip diameter (in.)	0.887500
Sweep cut: depth (in.)	0.066271
Sweep cut: profile width at start diameter (in.)	0.083684
Sweep cut: tip width (root flat S max or radius r max) (in.)	0.007141
Constant c = 0.80803P (in.)	0.080803
PD tolerance component 0.00854√P (in.)	0.002701
X gage: pitch tolerance (in.)	0.00030
X gage: flank angle tolerance (min)	10
X gage: major/minor tolerance (in.)	0.0006
X gage: PD tolerance (in.)	0.00030
X gage: PD equivalent of pitch/flank tol. (in.)	0.0010
Z plain gage tolerance (in.)	0.00010
GO gage PD limit (in.)	0.8150
NOT GO gage PD limit (in.)	0.8224
NOT GO crest/minor truncated dia (in.)	0.8574
Root relief width GO (0.167P) (in.)	0.016700
Root relief width NOT GO (0.25P) (in.)	0.025000
Check against formulas	OK
Notes	Class 2: no taper/roundness requirement (para. 6.6.1).

ASME B1.9: Buttress Inch Screw Threads. Source: workbook data (2026-10-10). Confirm against your licensed copy of the standard before use.